YaoYu chromium carbide wear resistant plate production process:

base material inspection- record number -hardfacing procedure- flattening process-plasma cutting-polishing-quality check before acceptance-painting and packing-ready for delivery

We, Zhangjiagang YaoYu is a local manufacturer in Suzhou, China to make chromium carbide wear resistant plate using different flux-cored welding wire, raw welding materials can be V-100, V-143,V-100Mo and V-145, etc.

Vautid-145 chromium carbide wear resistant plate-Zhangjiagang YaoYu

Base material
all weldable steels, mostly boiler plates, high alloyed temperature resistant Cr-Ni-Sheets and fine-grained steels
Hardfacing:
High-chromium/high-carbon alloy on Fe basis with embedded special carbides
Typical filler material analysis following
DIN EN ISO 6847 (%)
Pure weld material: C: 5.5 – Cr: 21 – Mo:2- Nb: 3- W:+-V:+- Fe: rest
hardness (DIN 32525-4):
approx. 820 HV 10

layer thickness 3 to 15 mm
Recommended applications
at high abrasive wear and high temperatures up to 750°C on average corrosion and low impact stress
Main Industries
metallurgical plant, cement industry, chemicla industry, petrochemical industry, etc.
Typical Applications
Chutes, sieves, fans, fan housings, grids, discharge tables, bell linings, separators, converters, hot dust ducts, etc