Search
文章正文
extremely hard chromium carbide overlay plate
Published:2016-07-11 12:11:21    Text Size:【BIG】【MEDIUM】【SMALL
Summary:YaoYu chromium carbide plates can be easily cut to dimensions using Plasma cutting or water jet cutting. Our overlay wear plates can be rolled as per drawings, and the minimum bending radius is 20 times of the plate total thickness.

Our chromium carbide overlay plate made with VAUTID 100 welding wires has extremely hard surface that can provide high hardness and long service lifetime.

Notes:
Standard plate size 1475*3050mm
Plate size is actual overlay area
Any alternative base material can be used, such as Q235B or stainless steel plate
Double side welding, overlay can be applied to both sides of the plate, such as 4+6+4 overlay plate
Customized overlay thicknesses can be produced upon request
Can be cut or installed on site

Fabrication services in YaoYu company

Cutting and Forming
YaoYu chromium carbide plates can be easily cut to dimensions using Plasma cutting or water jet cutting. Our overlay wear plates can be rolled as per drawings, and the minimum bending radius is 20 times of the plate total thickness.

Machining
Please kindly note that hardfacing overlay plate cannot be machined or drilled by conventional methods. Both countersunk and square holes must be cut by plasma or water jet cutting.

Installation
Commonly, the welding beads shall be installed perpendicular to the materials flow direction in order to obtain maximum wear life. In YaoYu company, we offer overlay plates with two different welding bead, normal straight welding pattern and weave pattern. The weave pattern overlay plate enables it much flexible to install either perpendicular or parallel to the material flow direction, make it more wear resistant than normal pattern wear plate, which increases service time of the
overlay plate.

Download the attachment:www.chromiumcarbideweldoverlay.com (Has been downloaded 0 times)
Products Search
脚注信息
YaoYu Chromium Carbide Overlay Plate Fighting Wear