Search
文章正文
what kinds of holes we can make on the chrome carbide wear plate
Published:2016-04-01 14:00:39    Text Size:【BIG】【MEDIUM】【SMALL
Summary:We make two types of holes on the chromium carbide overlay plate, through holes and countersunk holes.

In YaoYu company, we do welding on mild steel plate to extend service lifetime of the easy to wear parts.

We also do various fabrication works in our factory, such as cut plate to size, roll the weld overlay plate into shapes according to customer drawings.

We make two types of holes on the chrome carbide wear plate, through holes and countersunk holes. Normally, through holes are easy to get after plasma cutting, but for the countersink holes, it also has two ways to make.

As we all know that the hardfacing layer of the overlay wear plate can not be machined, so we do not suggest to make taper holes directly on the wear plates, it always cost too much time and manual work. But some clients do not accept to use countersunk holes with plug, they worry that  plugswill worn out fast anyway as the materials we use to make plugs are only common steel plate Q235B.

Anyway, we will fully follow your advice to make holes if you can not accept holes with plugs.

Download the attachment:www.chromiumcarbideweldoverlay.com (Has been downloaded 11 times)
Products Search
脚注信息
YaoYu Chromium Carbide Overlay Plate Fighting Wear